Posts Tagged ‘store’

Smart Tweezers Offset Calibration Board Available in the LCR-Reader Store

// May 24th, 2017 // No Comments » // LCR-Reader, LCR-Reader Store, News, Smart Tweezers, ST-5S, Uncategorized

Siborg’s newest addition to the LCR-Reader Store is the Smart Tweezers Offset Calibration Board.

This PCB emulator allows Smart Tweezers and Colibri LCR-meter users to easily and accurately find the offset capacitance to a varied range of components (02014, 0402, etc.) with a simple measurement. The PCB uses holes at the width of components; when the tips of a device are inserted in the holes, the device will give the actual offset value. This value can then be subtracted from the value of the component being measured.

Previously, to find out the parasitic value, users had to approximate the width of the component with the tips. This method was unreliable for accuracy.

The Offset Calibration Board also makes setting the Smart Tweezers’ semi-automatic offset subtraction value easier.

The Smart Tweezers Offset Calibration Board is available in the LCR-Reader Store in all Smart Tweezers and LCR-Reader Pro and Plus task kits as well as alone.

Educational Sale for Students, Educators and Educational Institutes in the LCR-Reader Store Until the End of August

// March 29th, 2017 // No Comments » // Bluetooth, LCR-Reader, LCR-Reader Store, News, sale, Smart LED Test Tweezers, Smart Tweezers, ST-5S

Siborg is offering a discount on all LCR-meters, test equipment and accessories in the LCR-Reader Store until August 31, 2017, for all students, teachers and educational institutes. The sales price will reflect the quantities of devices purchased.

The LCR-Reader and Smart Tweezers LCR-and ESR-meters, as well as the LCR-Reader Pro task kits and Smart Tweezers Bluetooth are also included in the sale.

The Smart Tweezers Bluetooth model recently got upgraded to include the ability to send data to the ST device as well as receive the measurement data. The Bluetooth connects to PC, smart phones or tablets and can be used with software such as National Instruments LabView and the Windows’ Smart Tweezers Bluetooth Utility. These programs allow users to save all measurement data into a .csv file or other preferred file type for later processing or to be put into a database. Custom profiles can be set that use previously measured results or manual settings; these profiles are a set of specific parameters that a component must meet. When the measurement is complete, the program will grant the component a pass or fail whether it meets the specifications.

Siborg is also offering their other accessories and SMD devices in the sale. These include:

  • SMD Multimeter Test Tweezers that allow for tweezer-probe precision with most multimeters that have 4 mm jacks.
  • LED Test Tweezers that use a 12 VDC output with variable current ratings for testing LEDs. This device can also test circuitry and components using the included multimeter connector cable, which allows the device to be used as tweezer probes.
  • LCR-Reader/Smart Tweezers Kelvin Probe Connector: a shielded two-wire connector that allows Smart Tweezers and LCR-Reader to become full probe stations. The device includes 5 attachments and allows the multimeter to measure components larger than the tweezers’ spread would normally allow. Siborg has recently added fine and extra-fine pin-probes that can be purchased separately.

From March 29th to August 31st, 2017, Siborg is offering the sale to educators, students and educational facilities in the LCR-Reader Store. Students are required to show valid I.D, while educators can have their devices shipped to an institute or send a P.O. The sales price is reflected in the quantity of devices bought, starting at 15% for a single device.

Updated Smart Tweezers with Bluetooth: Now Sends and Receives Information

// March 24th, 2017 // No Comments » // Bluetooth, LCR-Reader Store, News, Smart Tweezers, ST-5S, Uncategorized

The Smart Tweezers ST5S-BT has been updated to include the ability to send and receive information to and from the device. The previous model allowed device only to be sent from the Smart Tweezers device to the communication software; the update allows software to control the device by sending test settings.

Smart Tweezers with Bluetooth is based on the ST-5S model with the same features and basic accuracy of 0.2%,  while also offering the ability to remotely record measurement data. The device connects to PC, tablets and smart phones with iOS and Android platforms. To connect to PC, the Bluetooth USB receiver stick is required. The device is then able to communicate with software such as NI LabView, Windows’ Smart Tweezers Bluetooth Utility and dedicated apps.

When connected to apps, users can set custom profiles using previous measurements or from scratch. The profiles set parameters that components must measure between. When a measurement is completed, the program will either determine if the component meets these specifications and is marked as red or green. Profiles can include the type of component, measurement values or secondary values. Profiles are also able to set device test settings like frequencies or test modes; these settings are sent to the device.

Depending on the software used, the measurements can be saved to Excel compatible files or databases for other file types for later review or processing. The ability to remotely record measurement values in real-time is essential for jobs where quality control is required.

Smart Tweezers ST5S-BT2 receiver stick uses an FTDI bridge that creates a virtual RS232 serial port for connection.

The newest model of Smart Tweezers Bluetooth is available in the LCR-Reader Store.

Windows' Smart Tweezers Bluetooth Utility measuring using a custom profile.

Windows’ Smart Tweezers Bluetooth Utility measuring using a custom profile.

End of January Sale in LCR-Reader Store and Amazon Sales Channels

// January 24th, 2017 // No Comments » // amazon, Bluetooth, LCR-Reader, LCR-Reader Store, News, sale, Smart LED Test Tweezers, Smart Tweezers

Siborg is hosting an end-of-January sale with up to 20% off devices and accessories i nthe LCR-Reader Store and Amazon Sales Channels. The sale begins on January 18th 2017 at 12:00 AM and end on January 31st at 11:59 PM EST. The sale includes LCR-Reader and Smart Tweezers (including Smart Tweezers with Bluetooth) devices and task kits, as well as LED Test Tweezers, Kelvin Probe Connector for Smart Tweezers and LCR-Reader, and SMD Multimeter Test Tweezers.

 

Go to the LCR-Reader Store or Amazon Sales Channels in USA, Canada and Europe before the end of January for your chance to take part in this sale!

End of Year Sale Starting December 26th, 2016

// December 22nd, 2016 // No Comments » // amazon, Bluetooth, calibration, Distributors, LCR-Reader, LCR-Reader Store, News, sale, ST-5S

Starting December 26th, 2016 at 12:00 AM Siborg is offering a discount on LCR-Readers, Smart Tweezers and up to 20% off task kits in the LCR-Reader Store and Amazon Sales channels in USA, Canada and Europe. The sale will end at 11:59PM on December 31st. This sale includes the new LCR-Reader Pro Plus and Smart Tweezers Pro task kits that include the Kelvin Probe Station.

probe_connector_opensystems

Siborg Systems Inc. is Offering a Discount on All Devices and Test Tweezers Until the End of September

// September 21st, 2016 // No Comments » // amazon, Bluetooth, LCR-Reader, News, sale, ST-5S

Until September 30th, 2016, Siborg is offering their LCR- and ESR-meters and Test Tweezers devices for 10% off in their online sales channels, including the LCR-Reader Store, Amazon.com, Amazon.ca, and Amazon.co.uk.

This sale includes all LCR-Reader and Smart Tweezers task kits, as well as the other tweezer-like devices like LED Test Tweezers, SMD Multimeter Test Tweezers and LCR-Reader Probe Connector.

The new model of Smart Tweezers, the ST5S-BT that allows users to connect and remotely record their measurement values in real-time over Bluetooth connection is also on sale.
lcrreaderprousNow is the perfect chance to pick up an LCR-Reader Professional Kit. This kit includes a pre-calibrated LCR-Reader, NIST traceable calibration certificate, charger and micro-USB cable, spare bent tweezer probes, an extra battery (only available in the LCR-Reader Store) and manuals.

 

 

Visit the LCR-Reader Store, Amazon.com, Amazon.co.uk or Amazon.ca for your chance to get Siborg’s devices at a discount from now until September 30th, 2016.

Siborg Systems Releases New LCR-Reader Probe Station

// July 14th, 2016 // No Comments » // LCR-Reader, LCR-Reader Store, News, Smart Tweezers

Siborg has recently added the LCR-Reader Probe Station to their LCR-Reader Store inventory.

The LCR-Reader Probe Station allows LCR-Reader LCR- and ESR- meters to preform full PCB probing and measure components outside of the tweezers’ allowed sizes.

The 60 cm shielded two-wire connection virtually eliminates parasitics from the wires, is easy to install and comes with seven attachments. Including a spade connector, alligator clips, long and short pin-probes, and 4 mm multimeter jack plugs.

Easy to install and simple to use; remove one of LCR-Reader’s gold-plated tweezer probes and replace with the small PCB on the connector cable, making sure that the gold strips on the flex cable and the connector match up. Tighten the screws, select the best attachment for the task at hand and start measuring. The attachments screw into the Probe Station’s universal connector.

The Probe Station works with LCR-Reader and Smart Tweezers models with removable tips.

The device is now available in the LCR-Reader Store for $24.99 US.

probe_connector_opensystems lcrreaderprobestation

Siborg Releases New Calibration Fixture and Certificates for LCR-Reader

// April 1st, 2016 // No Comments » // calibration, LCR-Reader, LCR-Reader Store, Maintenance, News, Smart Tweezers, Smart Tweezers Maintenance

LCR-Reader being calibrated by the new fixture. When a device is connected, it will show the measurement values on its' display. These values are then compared to the known values within the calibration fixture.

LCR-Reader being calibrated by the new fixture. When a device is connected, it will show the measurement values on its’ display. These values are then compared to the known values within the calibration fixture.

Siborg has been working over the past year with the Institute of Automation and Electrometry at the Russian Academy of Sciences in creating a Calibration Fixture that will allow periodic calibration of all models of Smart Tweezers, and, most importantly, the LCR-Reader. The calibration fixture was then sent to Navair Technologies in Toronto, Canada to be verified. With this verification from Navair, Siborg will soon be able to include calibration certificates with LCR-Reader, which was a main hindrance in companies using the device.

The calibration unit utilizes a 4-wire connection which has been found to reduce noise between connections and the PCB within the calibration fixture.

Previous calibration fixtures used a 2-wire connector which worked well for older models of Smart Tweezers, including the ST-1, ST-2 and ST-3. The 2-wire connector was not able to handle the measurements within the LCR-Reader and Smart Tweezers measurement ranges. Due to parasitics, it could not measure lower values of capacitance and inductance and higher values of resistance. Therefore, the 2-wire calibration fixture was only able to measure mid-range values.

The calibration fixture uses 14 known components that lay within the range of measurements. When a device is connected, the fixture will signal a different component with each button push. The measurement values are instantly displayed on the LCR-Reader or Smart Tweezers‘ display which can then be compared to the known values of the components to determine accuracy.

“The new fixture makes it much easier to provide periodic traceable calibration now that it has been certified by Navair Technologies. We have now completed two versions of the calibration fixture using both 4-wire and 2-wire connections. The 4-wire is best suited for newer models, including the recent LCR-Reader. The 2jig-wire is best for the older models, including the ST-1, ST-2, ST-3 and STIC. These older models used a 2-wire connection in the handles of the device and could not be properly tested with the 4-wire terminal. This new calibration unit will allow all models to be tested and calibrated.” says the Director of Research and Development at Siborg, Michael Obrecht.

Soon, the calibration certificates will be available in the LCR-Reader Store; there will be 2 types to choose from: a basic calibration certificate that ensures the device has been calibrated, or a more detailed format that shows the measurement results compared to the known values.

Siborg Systems Inc. Launches Newly Designed Webstore and Offers Discounts Until the End of the Year

// December 21st, 2015 // No Comments » // LCR-Reader, News, sale, ST-5S

Siborg Systems Inc. has recently launched their newly updated web store. The new design is easier to use with product details, photos and a cart to add items to before checking out.

Siborg has also added the LED Test Tweezers and new “Task Kits” for Smart Tweezers ST-5S and LCR-Reader. These kits offer customers to buy extra accessories, such as tips, batteries and chargers, instead of buying all pieces separately. A discount is offered depending on the amount of products in the kit.

Come check out the new store and enjoy discounts until December 31st, 2015!