Posts Tagged ‘web store’

New LCR-Reader-MP Introductory Video

// October 4th, 2017 // No Comments » // LCR-Reader, LCR-Reader Store, LCR-Reader-MP, News, Uncategorized

Siborg has released a new introduction video for LCR-Reader-MP. The video goes over the basic features and functions of the multipurpose device. It also shows how to set basic settings in the device. The video has been published on Youtube.

LCR-Reader-MP is a new model in the LCR-Reader family of handheld LCR- and ESR-meters. The device has a 0.1% basic accuracy and various test modes and features.

Features include:

  • Automatic and manual LCR, ESR, Diode/LED measurements
  • 0.1% basic accuracy
  • Diode/LED and Continuity testing
  • AC/DC voltage measurements
  • Frequency, Pulse Period and Duty Cycle measurements
  • Oscilloscope Transient Voltage display up to 100 kHz
  • Signal Generator with Sine, Triangle, and Rectangle pulse shapes
  • Two test signal levels; Automatic Test Signal Reduction to 0.1 V for in-circuit measurements
  • Measures components to a 0201 size (about 0.3 mm)
  • Displays active and reactive impedance component display
  • 2 oz. weight
  • Li-Ion battery with micro-USB charging

Recently, Siborg had sent the LCR-Reader-MP to Navair Technologies for calibration. After receiving the results, Siborg is able to issue a NIST traceable calibration certificate for the device. The LCR-Reader-MP has also received FCC certification.

The LCR-Reader-MP is now available for pre-order from Siborg in the online LCR-Reader Store.

LCR-Reader-MP Multipurpose LCR/ESR-meter

Multipurpose LCR, ESR and Diode/LED tester from Siborg Systems Inc.

Siborg Offering New Multi Purpose Device: LCR-Reader-MP

// August 29th, 2017 // No Comments » // LCR-Reader, LCR-Reader Store, News, Uncategorized

LCR-Reader-MP Multipurpose LCR/ESR-meter

Multipurpose LCR, ESR and Diode/LED tester from Siborg Systems Inc.

Beginning after September 1st, 2017, Siborg is offering a new multipurpose device, the LCR-Reader-MP. This device has a basic accuracy better than 0.1%, a 100 kHz test frequency and more features than Smart Tweezers ST-1.

The LCR-Reader-MP offers many features and measurement modes, including AC/DC voltage measurements, signal generation, oscilloscope mode, pulse counting, frequency measurements, LED and diode testing and more. One of the most important features of the device is the 100 kHz test frequency that allows for 1 nH resolution for inductance measurements and 0.01 pF for capacitance.

The new device is especially helpful when testing large capacitances up to 680 mF using the ‘Large Capacitance’ mode. This will allow electrolytic capacitors to be measured at 120 Hertz with the ESR being measured at 100 kHz according to the regular electrolytic capacitor test conditions. When using the ‘Large Capacitance’ mode, the device will automatically reduce the test frequency to 25 Hertz which allows for reasonable accuracy. The device also offers a wide range of test frequencies for the best results depending on the task; these include: 50, 100, 120 Hz, 1, 10, 20, 30, 40, 50, 60, 75 and 100 kHz.

The LCR-Reader-MP features an oscilloscope mode for analyzing voltage wave forms with frequencies up to 100 kHz on an active circuit board. This mode is very useful when used in conjuncture with the LCR-Reader Kelvin Probe Connector. The Probe Connector extends the reach of the multimeter, allowing for components larger than the tweezers’ spread to be measured and allows to check wave forms at various nodes on the PCB.

The device does have some downsides: a rather high test signal source resistance of 1 kOhm and a maximum test signal of 0.65 Vrms which is not enough for reliable evaluation of some ceramic capacitors which can result in lower than actual capacitance values.

LCR-Reader-MP is slightly larger than LCR-Reader and Smart Tweezers; at 2 oz., it is twice as heavy and is almost double the width. Though larger, the MP device features a larger screen with better readability.

Features on LCR-Reader-MP:

  • Automatic L-C-R, ESR and Diode/LED measurements
  • Better than 0.1% basic accuracy
  • Signal Generator: Triangle, Rectangle and Sine pulse shapes up to 100 kHz
  • AC/DC voltage measurements up to 15 V
  • Current measurements
  • LED/Diode and Continuity measurements
  • Easy Short/Open calibration and offset removal
  • Oscilloscope Transient Voltage display up to 100 kHz
  • Measurement of Frequency, Pulse Period, Duty Cycle up to 400 kHz
  • Two Test Signal Levels: Automatic Test Signal Reduction to 0.1 V for in-circuit measurement
  • Handles components as small as 0201 sizes (0.3mm)
  • Displays active and reactive impedance components
  • Li-Ion battery with micro-USB charging port
  • 2 oz. (60 grams) weight

LCR-Reader-MP will be available after September 1st, 2017. Siborg is offering an introductory price of $388.99 USD and will be taking pre-orders. The devices will be shipped as they become available.

Educational Sale for Students, Educators and Educational Institutes in the LCR-Reader Store Until the End of August

// March 29th, 2017 // No Comments » // Bluetooth, LCR-Reader, LCR-Reader Store, News, sale, Smart LED Test Tweezers, Smart Tweezers, ST-5S

Siborg is offering a discount on all LCR-meters, test equipment and accessories in the LCR-Reader Store until August 31, 2017, for all students, teachers and educational institutes. The sales price will reflect the quantities of devices purchased.

The LCR-Reader and Smart Tweezers LCR-and ESR-meters, as well as the LCR-Reader Pro task kits and Smart Tweezers Bluetooth are also included in the sale.

The Smart Tweezers Bluetooth model recently got upgraded to include the ability to send data to the ST device as well as receive the measurement data. The Bluetooth connects to PC, smart phones or tablets and can be used with software such as National Instruments LabView and the Windows’ Smart Tweezers Bluetooth Utility. These programs allow users to save all measurement data into a .csv file or other preferred file type for later processing or to be put into a database. Custom profiles can be set that use previously measured results or manual settings; these profiles are a set of specific parameters that a component must meet. When the measurement is complete, the program will grant the component a pass or fail whether it meets the specifications.

Siborg is also offering their other accessories and SMD devices in the sale. These include:

  • SMD Multimeter Test Tweezers that allow for tweezer-probe precision with most multimeters that have 4 mm jacks.
  • LED Test Tweezers that use a 12 VDC output with variable current ratings for testing LEDs. This device can also test circuitry and components using the included multimeter connector cable, which allows the device to be used as tweezer probes.
  • LCR-Reader/Smart Tweezers Kelvin Probe Connector: a shielded two-wire connector that allows Smart Tweezers and LCR-Reader to become full probe stations. The device includes 5 attachments and allows the multimeter to measure components larger than the tweezers’ spread would normally allow. Siborg has recently added fine and extra-fine pin-probes that can be purchased separately.

From March 29th to August 31st, 2017, Siborg is offering the sale to educators, students and educational facilities in the LCR-Reader Store. Students are required to show valid I.D, while educators can have their devices shipped to an institute or send a P.O. The sales price is reflected in the quantity of devices bought, starting at 15% for a single device.

End of January Sale in LCR-Reader Store and Amazon Sales Channels

// January 24th, 2017 // No Comments » // amazon, Bluetooth, LCR-Reader, LCR-Reader Store, News, sale, Smart LED Test Tweezers, Smart Tweezers

Siborg is hosting an end-of-January sale with up to 20% off devices and accessories i nthe LCR-Reader Store and Amazon Sales Channels. The sale begins on January 18th 2017 at 12:00 AM and end on January 31st at 11:59 PM EST. The sale includes LCR-Reader and Smart Tweezers (including Smart Tweezers with Bluetooth) devices and task kits, as well as LED Test Tweezers, Kelvin Probe Connector for Smart Tweezers and LCR-Reader, and SMD Multimeter Test Tweezers.

 

Go to the LCR-Reader Store or Amazon Sales Channels in USA, Canada and Europe before the end of January for your chance to take part in this sale!

End of Year Sale Starting December 26th, 2016

// December 22nd, 2016 // No Comments » // amazon, Bluetooth, calibration, Distributors, LCR-Reader, LCR-Reader Store, News, sale, ST-5S

Starting December 26th, 2016 at 12:00 AM Siborg is offering a discount on LCR-Readers, Smart Tweezers and up to 20% off task kits in the LCR-Reader Store and Amazon Sales channels in USA, Canada and Europe. The sale will end at 11:59PM on December 31st. This sale includes the new LCR-Reader Pro Plus and Smart Tweezers Pro task kits that include the Kelvin Probe Station.

probe_connector_opensystems

Siborg Systems Inc. is Offering a Discount on All Devices and Test Tweezers Until the End of September

// September 21st, 2016 // No Comments » // amazon, Bluetooth, LCR-Reader, News, sale, ST-5S

Until September 30th, 2016, Siborg is offering their LCR- and ESR-meters and Test Tweezers devices for 10% off in their online sales channels, including the LCR-Reader Store, Amazon.com, Amazon.ca, and Amazon.co.uk.

This sale includes all LCR-Reader and Smart Tweezers task kits, as well as the other tweezer-like devices like LED Test Tweezers, SMD Multimeter Test Tweezers and LCR-Reader Probe Connector.

The new model of Smart Tweezers, the ST5S-BT that allows users to connect and remotely record their measurement values in real-time over Bluetooth connection is also on sale.
lcrreaderprousNow is the perfect chance to pick up an LCR-Reader Professional Kit. This kit includes a pre-calibrated LCR-Reader, NIST traceable calibration certificate, charger and micro-USB cable, spare bent tweezer probes, an extra battery (only available in the LCR-Reader Store) and manuals.

 

 

Visit the LCR-Reader Store, Amazon.com, Amazon.co.uk or Amazon.ca for your chance to get Siborg’s devices at a discount from now until September 30th, 2016.

Siborg Releases New Calibration Fixture and Certificates for LCR-Reader

// April 1st, 2016 // No Comments » // calibration, LCR-Reader, LCR-Reader Store, Maintenance, News, Smart Tweezers, Smart Tweezers Maintenance

LCR-Reader Calibration Fixture

LCR-Reader being calibrated by the new fixture. When a device is connected, it will show the measurement values on its’ display. These values are then compared to the known values within the calibration fixture.

Siborg has been working over the past year with the Institute of Automation and Electrometry at the Russian Academy of Sciences in creating a Calibration Fixture that will allow periodic calibration of all models of Smart Tweezers, and, most importantly, the LCR-Reader. The calibration fixture was then sent to Navair Technologies in Toronto, Canada to be verified. With this verification from Navair, Siborg will soon be able to include calibration certificates with LCR-Reader, which was a main hindrance in companies using the device.

The calibration unit utilizes a 4-wire connection which has been found to reduce noise between connections and the PCB within the calibration fixture.

Previous calibration fixtures used a 2-wire connector which worked well for older models of Smart Tweezers, including the ST-1, ST-2 and ST-3. The 2-wire connector was not able to handle the measurements within the LCR-Reader and Smart Tweezers measurement ranges. Due to parasitics, it could not measure lower values of capacitance and inductance and higher values of resistance. Therefore, the 2-wire calibration fixture was only able to measure mid-range values.

The calibration fixture uses 14 known components that lay within the range of measurements. When a device is connected, the fixture will signal a different component with each button push. The measurement values are instantly displayed on the LCR-Reader or Smart Tweezers‘ display which can then be compared to the known values of the components to determine accuracy.

“The new fixture makes it much easier to provide periodic traceable calibration now that it has been certified by Navair Technologies. We have now completed two versions of the calibration fixture using both 4-wire and 2-wire connections. The 4-wire is best suited for newer models, including the recent LCR-Reader. The 2jig-wire is best for the older models, including the ST-1, ST-2, ST-3 and STIC. These older models used a 2-wire connection in the handles of the device and could not be properly tested with the 4-wire terminal. This new calibration unit will allow all models to be tested and calibrated.” says the Director of Research and Development at Siborg, Michael Obrecht.

Soon, the calibration certificates will be available in the LCR-Reader Store; there will be 2 types to choose from: a basic calibration certificate that ensures the device has been calibrated, or a more detailed format that shows the measurement results compared to the known values.

Siborg Systems Inc. Launches Newly Designed Webstore and Offers Discounts Until the End of the Year

// December 21st, 2015 // No Comments » // LCR-Reader, News, sale, ST-5S

Siborg Systems Inc. has recently launched their newly updated web store. The new design is easier to use with product details, photos and a cart to add items to before checking out.

Siborg has also added the LED Test Tweezers and new “Task Kits” for Smart Tweezers ST-5S and LCR-Reader. These kits offer customers to buy extra accessories, such as tips, batteries and chargers, instead of buying all pieces separately. A discount is offered depending on the amount of products in the kit.

Come check out the new store and enjoy discounts until December 31st, 2015!