Starting December 26th, 2016 at 12:00 AM Siborg is offering a discount on LCR-Readers, Smart Tweezers and up to 20% off task kits in the LCR-Reader Store and Amazon Sales channels in USA, Canada and Europe. The sale will end at 11:59PM on December 31st. This sale includes the new LCR-Reader Pro Plus and Smart Tweezers Pro task kits that include the Kelvin Probe Station.
Siborg worked with the Institute of Automation and Electrometry at the Russian Academy of Sciences in creating a new calibration fixture for the newer models of Smart Tweezers and LCR-Reader. The previous fixture was unable to handle the full measurement range of the devices.
After completion, Siborg sent the calibration fixture to one of Canada’s leading calibration houses for verification. With this verfication, Siborg was able to begin issuing NIST Traceable Calibration Certificates for LCR-Reader; the ability to periodically calibrated LCR-Reader was an issue with professionals that require their test equipment annually.
Now, Siborg is offering certificates with every LCR-Reader in the LCR-Reader Store.
Siborg has also added the LCR-Reader Professional to their growing list of task kits. The LCR-Reader Professional comes with a pre-calibrated device, calibration certificate, spare bent probes, an extra battery and charger.
The LCR-Reader Store has lots to offer for customers; LCR-Reader and Smart Tweezers task kits: pre-bundled devices and accessories that offer customers a deal compared to buying each piece separately.
- SMD Multimeter Test Tweezers: add tweezer-probe functionality to multimeters
- LED Test Tweezers: test LEDs, switches, fuses, etc. with tweezer-precision, also includes a connector cable to be used with multimeters as probes
- LCR-Reader Probe Connector: Turn LCR-Reader and Smart Tweezers into a probe station for complete PCB probing; also allows the device to measure components that will not fit between the tweezers’ tips.
- The newest product in Siborg’s lineup is the Smart Tweezers ST5S-BT that instantly records measurement results over Bluetooth connection. See more about Smart Tweezers ST5S-BT.
Siborg has been working over the past year with the Institute of Automation and Electrometry at the Russian Academy of Sciences in creating a Calibration Fixture that will allow periodic calibration of all models of Smart Tweezers, and, most importantly, the LCR-Reader. The calibration fixture was then sent to Navair Technologies in Toronto, Canada to be verified. With this verification from Navair, Siborg will soon be able to include calibration certificates with LCR-Reader, which was a main hindrance in companies using the device.
The calibration unit utilizes a 4-wire connection which has been found to reduce noise between connections and the PCB within the calibration fixture.
Previous calibration fixtures used a 2-wire connector which worked well for older models of Smart Tweezers, including the ST-1, ST-2 and ST-3. The 2-wire connector was not able to handle the measurements within the LCR-Reader and Smart Tweezers measurement ranges. Due to parasitics, it could not measure lower values of capacitance and inductance and higher values of resistance. Therefore, the 2-wire calibration fixture was only able to measure mid-range values.
The calibration fixture uses 14 known components that lay within the range of measurements. When a device is connected, the fixture will signal a different component with each button push. The measurement values are instantly displayed on the LCR-Reader or Smart Tweezers‘ display which can then be compared to the known values of the components to determine accuracy.
“The new fixture makes it much easier to provide periodic traceable calibration now that it has been certified by Navair Technologies. We have now completed two versions of the calibration fixture using both 4-wire and 2-wire connections. The 4-wire is best suited for newer models, including the recent LCR-Reader. The 2-wire is best for the older models, including the ST-1, ST-2, ST-3 and STIC. These older models used a 2-wire connection in the handles of the device and could not be properly tested with the 4-wire terminal. This new calibration unit will allow all models to be tested and calibrated.” says the Director of Research and Development at Siborg, Michael Obrecht.
Soon, the calibration certificates will be available in the LCR-Reader Store; there will be 2 types to choose from: a basic calibration certificate that ensures the device has been calibrated, or a more detailed format that shows the measurement results compared to the known values.