Bluetooth – Smart Tweezers LCR-Reader

New Bluetooth Data Acquisition Tool

Siborg has released their LCR-Reader-MPA Bluetooth Data Acquisition Tool with Logger program.

The LCR-Reader-MPA Bluetooth Data Acquisition Tool connects to PC and Android over a Bluetooth connection and allows users to remotely record measurements values in real time.

To use the LCR-MPA-BT Logger program, simply connect the BT dongle to the PC, turn on the MPA and only then start the program. The program will show that the device is connected and begin mirroring what is on the display in the program – showing the main impedance value, secondary value, signal test level, test frequency level, and equivalent circuit. There are also clickable parameters on the program’s main display for changing quick settings – frequency, test mode, etc.

The main feature of the program is the Pass/Fail assessment feature. Users are able to set custom profiles for each component in a predefined list (such as BOM). Users also set the desired values and test settings for the measured components. When testing, the main display on the program will turn red if the measured component does not meet the desired specs. The recorded values are marked red in the ‘Test’ column for fails, and green for pass.

LCR-MPA-BT Data Logger Program failing single test

There are two test modes: Single Component Test and Multiple Component Test. Single Component Test is best for testing the same type of component mutiple times. Multiple Component Test is best for full PCBs that have a range of different components with varied values. Users can set the name and the desired values for each component in the list. All measurement values, for both modes, can be exported to Excel.

Coming Soon: LCR-Reader-MPA with Remote Recording in Real Time

Siborg’s LCR-Reader-MPA will soon be getting an update which allows the device to remotely record measurement value over a Bluetooth connection. This adds an extra feature to the device, which already boasts a 0.1% basic accuracy and wide range of features including a 100 kHz test frequency, LED/diode testing, oscilloscope mode and more.

The new Bluetooth feature uses a low-energy Bluetooth connection using a dongle to PC, and eventually dedicated apps for iOS and Android. When connected, LCR-Reader-MPA will send the measurement data, including the main and secondary measurements value and test parameters are sent to the receiving software in a comma-separated string of values. The ability to automatically record values in real time is exceptionally useful for quality control and situations where recording values is crucial.

The device can work with programs such as LCR-Reader-MPA BT Logger, TeraTerm, or NI LabView. The recorded values can be saved to a spreadsheet or database for later analysis.

End of Year Sale

Siborg is hosting an end of year sale featuring LCR-Reader, LCR-Reader-MP, Smart Tweezers and other items from the LCR-Reader Store.

The sale stars December 17th, 2018 and will end on January 1st, 2019 and includes the LCR-Reader Store and Siborg’s Amazon sales channels in USA, Canada, France, Germany, Spain and Italy.

Educational Sale for Students, Educators and Educational Institutes in the LCR-Reader Store Until the End of August

Siborg is offering a discount on all LCR-meters, test equipment and accessories in the LCR-Reader Store until August 31, 2017, for all students, teachers and educational institutes. The sales price will reflect the quantities of devices purchased.

The LCR-Reader and Smart Tweezers LCR-and ESR-meters, as well as the LCR-Reader Pro task kits and Smart Tweezers Bluetooth are also included in the sale.

The Smart Tweezers Bluetooth model recently got upgraded to include the ability to send data to the ST device as well as receive the measurement data. The Bluetooth connects to PC, smart phones or tablets and can be used with software such as National Instruments LabView and the Windows’ Smart Tweezers Bluetooth Utility. These programs allow users to save all measurement data into a .csv file or other preferred file type for later processing or to be put into a database. Custom profiles can be set that use previously measured results or manual settings; these profiles are a set of specific parameters that a component must meet. When the measurement is complete, the program will grant the component a pass or fail whether it meets the specifications.

Siborg is also offering their other accessories and SMD devices in the sale. These include:

SMD Multimeter Test Tweezers that allow for tweezer-probe precision with most multimeters that have 4 mm jacks.
LED Test Tweezers that use a 12 VDC output with variable current ratings for testing LEDs. This device can also test circuitry and components using the included multimeter connector cable, which allows the device to be used as tweezer probes.
LCR-Reader/Smart Tweezers Kelvin Probe Connector: a shielded two-wire connector that allows Smart Tweezers and LCR-Reader to become full probe stations. The device includes 5 attachments and allows the multimeter to measure components larger than the tweezers’ spread would normally allow. Siborg has recently added fine and extra-fine pin-probes that can be purchased separately.

From March 29th to August 31st, 2017, Siborg is offering the sale to educators, students and educational facilities in the LCR-Reader Store. Students are required to show valid I.D, while educators can have their devices shipped to an institute or send a P.O. The sales price is reflected in the quantity of devices bought, starting at 15% for a single device.

Updated Smart Tweezers with Bluetooth: Now Sends and Receives Information

The Smart Tweezers ST5S-BT has been updated to include the ability to send and receive information to and from the device. The previous model allowed device only to be sent from the Smart Tweezers device to the communication software; the update allows software to control the device by sending test settings.

Smart Tweezers with Bluetooth is based on the ST-5S model with the same features and basic accuracy of 0.2%, while also offering the ability to remotely record measurement data. The device connects to PC, tablets and smart phones with iOS and Android platforms. To connect to PC, the Bluetooth USB receiver stick is required. The device is then able to communicate with software such as NI LabView, Windows’ Smart Tweezers Bluetooth Utility and dedicated apps.

When connected to apps, users can set custom profiles using previous measurements or from scratch. The profiles set parameters that components must measure between. When a measurement is completed, the program will either determine if the component meets these specifications and is marked as red or green. Profiles can include the type of component, measurement values or secondary values. Profiles are also able to set device test settings like frequencies or test modes; these settings are sent to the device.

Depending on the software used, the measurements can be saved to Excel compatible files or databases for other file types for later review or processing. The ability to remotely record measurement values in real-time is essential for jobs where quality control is required.

Smart Tweezers ST5S-BT2 receiver stick uses an FTDI bridge that creates a virtual RS232 serial port for connection.

The newest model of Smart Tweezers Bluetooth is available in the LCR-Reader Store.

Windows’ Smart Tweezers Bluetooth Utility measuring using a custom profile.

End of January Sale in LCR-Reader Store and Amazon Sales Channels

Siborg is hosting an end-of-January sale with up to 20% off devices and accessories i nthe LCR-Reader Store and Amazon Sales Channels. The sale begins on January 18th 2017 at 12:00 AM and end on January 31st at 11:59 PM EST. The sale includes LCR-Reader and Smart Tweezers (including Smart Tweezers with Bluetooth) devices and task kits, as well as LED Test Tweezers, Kelvin Probe Connector for Smart Tweezers and LCR-Reader, and SMD Multimeter Test Tweezers.

Go to the LCR-Reader Store or Amazon Sales Channels in USA, Canada and Europe before the end of January for your chance to take part in this sale!

End of Year Sale Starting December 26th, 2016

Starting December 26th, 2016 at 12:00 AM Siborg is offering a discount on LCR-Readers, Smart Tweezers and up to 20% off task kits in the LCR-Reader Store and Amazon Sales channels in USA, Canada and Europe. The sale will end at 11:59PM on December 31st. This sale includes the new LCR-Reader Pro Plus and Smart Tweezers Pro task kits that include the Kelvin Probe Station.

Siborg Systems Inc. is Offering a Discount on All Devices and Test Tweezers Until the End of September

Until September 30th, 2016, Siborg is offering their LCR- and ESR-meters and Test Tweezers devices for 10% off in their online sales channels, including the LCR-Reader Store, Amazon.com, Amazon.ca, and Amazon.co.uk.

This sale includes all LCR-Reader and Smart Tweezers task kits, as well as the other tweezer-like devices like LED Test Tweezers, SMD Multimeter Test Tweezers and LCR-Reader Probe Connector.

The new model of Smart Tweezers, the ST5S-BT that allows users to connect and remotely record their measurement values in real-time over Bluetooth connection is also on sale.
lcrreaderprous Now is the perfect chance to pick up an LCR-Reader Professional Kit. This kit includes a pre-calibrated LCR-Reader, NIST traceable calibration certificate, charger and micro-USB cable, spare bent tweezer probes, an extra battery (only available in the LCR-Reader Store) and manuals.

Visit the LCR-Reader Store, Amazon.com, Amazon.co.uk or Amazon.ca for your chance to get Siborg’s devices at a discount from now until September 30th, 2016.

Smart Tweezers Bluetooth Now Available in the LCR-Reader Store

Smart Tweezers ST5S-BT2 Bluetooth enabled LCR- and ESR-meter — Smart Tweezers ST5S-BT offers users a way to record their measurement values in real-time using Bluetooth

Siborg Systems Inc. is now offering Smart Tweezers Bluetooth enabled ST5S-BT in the
LCR-Reader Store.

The Smart Tweezers ST5S-BT is a Bluetooth enabled ST-5S model with the same features and functions with the added function of remotely recording measurements in real-time. The ability to record measurements is efficient for those who require to record all measurement values and to create a quick reference of previous measurements.

The ST5S-BT connects to computer using a Bluetooth USB receiver stick, or using Android. Eventually, there will be dedicated apps for iOS, Windows and Android. Currently, the receiver stick is needed to connect. Any communication software can receive data, including NI LabView® and Tera Term free software. (Note: the receiver stick is needed when using NI LabView®)

When connected, the receiver stick opens a virtual port that the data is sent over in a string of comma separated values that show exactly what was on the device’s display at the time of the measurement. This string is as shown:

C1.398nF,R3.461kR,10kHz,0.5,S,,,,;

This is explained as the main impedance value and its typle (Capacitor 1.398nF), secondary value and type, test frequency, test signal level, measurement mode (S for serial) and 4 reserved values. The attached photo shows Tera Term software receiving the data. The data sent can be saved into a file or, when using NI LabView®, saved into a database to be processed later.

The ST5S-BT is based on the the ST-5S model and offers the same features as the latter.

Features Include:

Fully automatic and manual L, C, R, ESR, Q, D and Z measurements
Basic accuracy of 0.2%
Variable tolerances of 1, 5, 10 and 20%
Continuity/diode/short testing
Extensive menus for customized measurements including offset subtraction, holds and nulls, etc.
NIST Traceable Calibration Certificate
4-way joystick navigation with the ability to change basic features from the home screen
1 oz. weight
Li-Ion battery with micro-USB charging
Bright OLED display

Siborg is offering two different packages for the ST5S-BT in the LCR-Reader Store, one with the USB receiver stick and one without . Please note when ordering, the USB receiver stick is required for use with computers and NI LabView®.