LCR-Reader Store – One Stop Shop for LCR/ESR Meters

The LCR-Reader Store from Siborg Systems Inc. offers a wide selection of handheld digital LCR/ESR meters, accessories and parts. The devices available are as follows:

  • LCR-Reader-MP: This is the newest model available from Siborg. The LCR-Reader-MP or Multipurpose has the highest basic accuracy of 0.1% and the widest selection of test features and functions over all LCR-Reader and Smart Tweezers devices. These features include:
    • Automatic LCR, Equivalent Series Resistance and Diode/LED measurement
    • Basic accuracy better than 0.1%
    • AC/DC voltage measurement up to 15 V
    • Oscilloscope Transient Voltage display for up to 100 kHz
    • Measurement of supercaps up to 680 mF
    • Measurement of Frequency, Pulse period, Duty Cycle up to 400 kHz
    • Signal Generator: Sine, Rectangle, Triangle pulse shapes up to 100 kHz
    • Diode and Continuity test}
    • Two Test Signal levels, Automatic Test Signal Reduction to 0.1 V for in-circuit measurement
    • Easy Short/Open Calibration, Offset Removal
    • Handling of components as small as 0201 size (about 0.3 mm)
    • Display of active and reactive impedance components
    • Adjustable test signal frequencies of 50, 100, 120 Hz, 1, 10, 20, 30, 40, 50, 60, 75 and 100 kHz
    • Jog-wheel navigation
    • 2 oz. weight, ergonomic design
    • Backlit LCD display
    • NIST traceable calibration certificate

 

  • LCR-Reader: The LCR-Reader is Siborg’s best selling device, which features a 0.5% basic accuracy with minimal features. This device was created as a lower cost alternative to other tweezer-based devices. LCR-Reader is able to automatically determine the type of component and select the best test range for that component. The one-button navigation allows users to select the test mode they desire. Features include:
    • 0.5% Basic Accuracy
    • Fully automatic L, C, R and ESR measurements
    • Manual mode selection
    • Instantly displayed results
    • 1 oz. weight
    • One-button navigation
    • NIST Traceable Calibration Certificate
    • OLED display
      • LCR-Reader Pro and LCR-Reader Pro Plus: These are LCR-Reader Task Kits that include an LCR-Reader device with calibration certificate and accessories (battery, Kelvin Probe Connector Kit, spare tips, charger. Note: accessories depending on task kit selected).

 

  • Smart Tweezers and Smart Tweezers with Bluetooth: Smart Tweezers are the original tweezer-based LCR meter with a 0.2% basic accuracy and multiple test features, including;
    • 0.2% basic accuracy
    • Manual and Automatic L, C, R, ESR, and Z test mode
    • Component sorting with 1%, 5%, 10% and 20% variable tolerances
    • Adjustable test signal levels
    • Diode/Continuity/Short testing
    • Parasitic offset subtraction
    • 1 oz. weight
    • NIST Traceable Calibration Certificate
    • 4-way joystick navigation
    • OLED display
      • Smart Tweezers with Bluetooth is able to connect to PC (ie: NI Labview, Tera Term, etc), Android and iOS to send and receive measurement data over a real-time connection. When connected, users are sent a comma separated string of values representing the outcomes, including the type of component, main and secondary values, and test parameters used. The ability to record all measurement data is invaluable for incoming quality control. The newest update to the device allows users to send information to the Smart Tweezers device and the ability to set parameters that components must meet. This is done by the user creating a profile in the receiving software. When testing, the component must meet this criteria before being granted a pass or fail by the software.
      • Note: the Bluetooth receiver stick is required to connect with PC and LabView 
  • LCR-Reader/Smart Tweezers Kelvin Probe Connector:   The LCR-Reader Kelvin Probe Connector is a shielded two-wire device that can be used as a full probe station. When connected, the LCR-Reader or Smart Tweezers can measure components that are larger than the tweezers’ gap. It is easy to connect to the device, simply remove one of the gold-plated tweezer tips and replace with the flat connector. All extension accessories screw into the other end. The two-wire connection eliminates additional offsets.
    Note: can be used with LCR-Reader, LCR-Reader-MP, Smart Tweezers and LCR-Reader Colibri.
  • Siborg also offers Task Kits that combine a device with accessories; when purchased, the task kits give a greater discount than buying a device and each accessory separately.

See everything Siborg has to offer at the LCR-Reader Store