Updated Smart Tweezers with Bluetooth: Now Sends and Receives Information

The Smart Tweezers ST5S-BT has been updated to include the ability to send and receive information to and from the device. The previous model allowed device only to be sent from the Smart Tweezers device to the communication software; the update allows software to control the device by sending test settings.

Smart Tweezers with Bluetooth is based on the ST-5S model with the same features and basic accuracy of 0.2%,  while also offering the ability to remotely record measurement data. The device connects to PC, tablets and smart phones with iOS and Android platforms. To connect to PC, the Bluetooth USB receiver stick is required. The device is then able to communicate with software such as NI LabView, Windows’ Smart Tweezers Bluetooth Utility and dedicated apps.

When connected to apps, users can set custom profiles using previous measurements or from scratch. The profiles set parameters that components must measure between. When a measurement is completed, the program will either determine if the component meets these specifications and is marked as red or green. Profiles can include the type of component, measurement values or secondary values. Profiles are also able to set device test settings like frequencies or test modes; these settings are sent to the device.

Depending on the software used, the measurements can be saved to Excel compatible files or databases for other file types for later review or processing. The ability to remotely record measurement values in real-time is essential for jobs where quality control is required.

Smart Tweezers ST5S-BT2 receiver stick uses an FTDI bridge that creates a virtual RS232 serial port for connection.

The newest model of Smart Tweezers Bluetooth is available in the LCR-Reader Store.

Windows' Smart Tweezers Bluetooth Utility measuring using a custom profile.
Windows’ Smart Tweezers Bluetooth Utility measuring using a custom profile.

Leave a Reply

Your email address will not be published. Required fields are marked *